18
19
9. Assemble the side panels before assembling the top panel on the cabinet then assemble this sub-assembly on the barbecue.
Screw M6x12
(countersunk head screw)
42
42
10. Assemble Left door (item 10) and Right door (item 11) using 4pcs Screw M6x12 (item a), 4 Handle brackets (item 12) and 2 Handles (item 13). then
assembl;e the door assemblies as pictured.
Screw
M6x12
12
10
11
13
NOTE:
To keep screw slot against screwdriver pass
screw through ribbon of plastic, hold both
together, assemble screw to handle, remove
plastic and re-use for the other three screws.
NOTE:
Once the cabinet has been fully assembled,
and the doors open and close correctly
with even clearances (top and bottom and
side-to-side), the screws can now be fully
tightened.
11. Assemble Left door (item 10) and Right door (item 11) using 4pcs Screw M6x12 (item a), 4 Handle brackets (item 12) and 2 Handles (item 13). then
assembl;e the door assemblies as pictured.
Screw M4x12
a
a-1
a-2
a-3
REPARING THE HOOD / GRILL ASSEMBLY
- Open the hood carton and remove the warming rack (item 23)
- Lift up and out the polystyrene corner packing.
- Remove the protective layer from the hood.
- Cut open all sides with a knife taking care not to damage the hood or grill in the process.
- Open the carton walls outwards and flatten. Remove the polystyrene packing from beneath the grill.
Open the hood and remove in order:
•
Packed cartons (some are empty and used as a gap filler) and any polystyrene packaging
•
Grill first, then hotplate
•
Remove the layer of cardboard
•
Remove extra feature options if any. Some specific barbecue models include some extra feature items.
•
At the rear you will locate the drip tray (item 18) remove this, (it is packed in the reverse). This may require the removal of the 2x step Screws
(item e)
•
The Hood / Grill is now ready to be lifted onto the cabinet. This is a large and heavy assembly which requires two persons to lift it safely into
position.
12. 1) In some barbecue models the knobs are not fitted to the grill then assemble 6 pcs knob (item 15) to the valve shaft on the body assembly, as
per the illusration below.
2) If the rear burner knob is not fitted to the grill assemble 1 x knob - Rear burner (item 34) to the Rear burner valve shaft.
When the Timer is OFF the flat on the
shaft faces the Bottom / 6 o’clock
position and the Flat on the knob
insert should match this position.
When the Timer is OFF the rounded shaft contour faces the
Top/ 12 o’clock position and the flat spring metal insert grips
the round face of the shaft of valve.
13. Assemble the grill body onto the trolley by using 4pcs Screw M4x12, and then assemble the bottle opener on the left side panel by using 2pcs
M4x12.
