Rad-57 Signal Extraction Pulse CO-Oximeter Operator’s Manual
9-1
9
S e r v i c e a n d M a i n t e n a n c e
I n t r o d u c t i o n
This chapter covers how to test the operation of the Rad-57, how to properly clean the Rad-57 Pulse
CO-Oximeter, how to replace the batteries and how to obtain service.
Under normal operation, no internal adjustment or recalibration is required.
WARNING: BEFORE CLEANING THE OXIMETER, ALWAYS TURN IT OFF AND
REMOVE THE BATTERIES.
C l e a n i n g
To clean the display panel, use a cotton swab moistened with 70% isopropyl alcohol and gently wipe
the panel.
To clean the outer surface of the oximeter, use a soft cloth dampened with a mild soap and water. Do
not allow liquids to enter the interior of the Instrument.
CAUTIONS:
■
DO NOT AUTOCLAVE, PRESSURE STERILIZE, OR GAS STERILIZE THIS OXIMETER.
■
DO NOT SOAK OR IMMERSE THE MONITOR IN ANY LIQUID.
■
USE THE CLEANING SOLUTION SPARINGLY. EXCESSIVE SOLUTION CAN FLOW INTO THE
MONITOR AND CAUSE DAMAGE TO INTERNAL COMPONENTS.
■
DO NOT TOUCH, PRESS, OR RUB THE DISPLAY PANELS WITH ABRASIVE CLEANING
COMPOUNDS, INSTRUMENTS, BRUSHES, ROUGH-SURFACE MATERIALS, OR BRING
THEM INTO CONTACT WITH ANYTHING THAT COULD SCRATCH THE PANEL.
■
DO NOT USE PETROLEUM-BASED OR ACETONE SOLUTIONS, OR OTHER HARSH
SOLVENTS, TO CLEAN THE OXIMETER. THESE SUBSTANCES ATTACK THE
INSTRUMENT’S MATERIALS AND INSTRUMENT FAILURE CAN RESULT.
Refer to Section 8,
Cleaning and Reuse of Masimo Reusable Sensors and Patient Cables
for cleaning
instructions of the sensor and patient cables.
Section 9- Service and Maintenance
Summary of Contents for Rad-57
Page 1: ...OPERATOR S MANUAL Signal Extraction Pulse CO Oximeter Masimo Rainbow SET ...
Page 2: ......
Page 72: ......
