Masibus LC5296-XP-DC, User Manual

Page: 13 / 31

Model: LC5296-XP-DC
Doc. Ref. no.:- m61D/om/401
Issue no.: 05
User’s Manual
Page 13 of 31
5. FRONT PANEL DETAILS
5.1 Front Panel Description
Name of Part Symbol Function
Increment Key

Enter into Edit Mode.

Increment the Value of any Parameter in edit mode.
Decrement Key

Enter into Edit Mode.

Decrement the Value of any Parameter in edit mode.
SET Key
(Menu / Enter
Key)

Shows Different Set Point, if this pressed in RUN mode.

It is used to enter in the sub menu (TUNE, CONF, CAL)

In Sub Menu it can be used to get to the next Parameter.

It is also used to save the parameters to nonvolatile memory,
when user setting a proper data by Increment and decrement
key for parameter configuration.
Escape Key

Get to the Previous Menu level.
PV 1
(Process
Value) Display
PV1

4 digital 0.56 inch RED Display

Display process value for Input 1

Display parameter name when user set parameter.

Display error message when an error occurs.
PV 2
(Process
Value)
Display
PV2

4 digital 0.56 inch RED Display

Display process value for Input 2

Display parameter value of parameter in process value field
when user set parameter.
Relay-1
Indication
RL1

ON when Relay-1 is energized & OFF otherwise.
Relay-2
Indication
RL2

ON when Relay-2 is energized & OFF otherwise.
TX Indication Tx

ON when device is transmitting some Data (RS-485).
RX Indication Rx

ON when device is receiving some Data (RS-485).