Masibus HT16Ew, User Manual

Page: 16 / 26

Ref. No: m94A/OM/201
Issue No: 01
Operator’s manual
Page 16 of 26
8.1 Run mode description:
(1) RUN Mode:
After powering on the device, unit will display Temperature and Humidity measured by
Sensor. Device also displays battery status bar &wireless symbol when wireless packet
is being transmitting to CDU/85xx+.
When device stay inactive or user doesn’t press any key during menu configuration,
timeout signal force menu screen to jump into RUN MODE and enter in sleep to save
power.
During RUN mode when increment key pressed for 5 second continuously at the same
moment press and release of menu key will send temperature & humidity data to
logger Device this is called manual frame transmission, doesn’t matter whether push-
time on or not.
When wireless communication established between HT16Ew & CDU/85xx+, wireless
symbol appear on top right corner of LCD, if by chance communication link break then
this symbol disappear.
In addition to that when HT16Ew transmitting Log-data, small ‘
˻
’ symbol appear on LCD
screen.
HT16W unit equipped with 3 push button key labeled as menu key, increment key&
decrement key.
Increment Key (INC)
Menu Key (MENU)
Decrement Key (DEC)
Increment Key (INC): shift to next menu/set particular digit/S.n(don’t apply changes)
Menu Key (MENU): enter in main menu/sub menu/apply change screen (S.Y/ S.n )
Decrement Key (DCR): shift to previous main menu/ shift cursor to next digit/ S.Y(apply
changes)
pswd
(Password):
HT16Ew menu is password protected user can restricts unwanted access of unit with
the help of password. When user press menu key during run mode password screen will
appear. Factory default password value is 3131, User can further change new password
in
P.SET/c.pwd menu later on.