Masibus HT16Ew, User Manual

Page: 24 / 26

Ref. No: m94A/OM/201
Issue No: 01
Operator’s manual
Page 24 of 26
(4)
HH
(hour) Mode:
This mode shows the current hour. End user also can change the hour for unit.
On the press of INC key, screen will appear which will show the hour for current time
.To change the date user first press MENU key, the first digit will blink. Now using INC
key user can change first digit. Now if user press the DCR key, cursor moves to second
digit. Now using INC key user can change second digit.
On the press of MENU key again, save Yes / save No (
S.Y
/
S.n
) screen will appear for
saving new change. If user will press “
S.n
” (INC Key) then it will discard the new
changes. If user will press “
S.Y
” (DCR Key) then it will set unit as hour.
If user press DCR key in between, it will shows the main menu screen.
(5)
mn
(minute) Mode:
This mode shows the current minute. End user can also change the minute for unit.
On the press of INC key, screen will appear which will show the minute for current time
.To change the date user first press MENU key, the first digit will blink. Now using INC
key user can change first digit. Now if user press the DCR key, cursor moves to second
digit. Now using INC key user can change second digit.
On the press of MENU key again, save Yes/ save No (
S.Y
/
S.n
) screen will appear for
saving new change. If user will press “
S.n
” (INC Key) then it will discard the new
changes. If user will press “
S.Y
” (DCR Key) then it will set unit as minute.
If user press DCR key in between, it will shows the main menu screen.
(6)
ss
(second) Mode:
This mode shows the current second. End user can also change the second for unit.
On the press of INC key, screen will appear which will show the second for current time
.To change the date user first press MENU key, the first digit will blink. Now using INC
key user can change first digit. Now if user press the DCR key, cursor moves to second
digit. Now using INC key user can change second digit.
On the press of MENU key again, save Yes/ save No (
S.Y
/
S.n
) screen will appear for
saving new change. If user will press “
S.n
” (INC Key) then it will discard the new
changes. If user will press “
S.Y
” (DCR Key) then it will set unit as second.
If user press DCR key in between, it will shows the main menu screen.