Masibus 1008S, User Manual, Page: 22 / 39

User Manual 21
Flow Indicator Totaliser 1008S
REF NO: m18A/om/101
Issue No: 17
8.4.2.2 Configuration Mode Parameters Of 1008S With Mass Flow
33 Over Range If Yes then integration total will be
running according to process value
corresponding to 20ma and if No then
integration total will stop after over limit is
reached. - Yes/No
34 Pulse time For averaging of input pulse. 2 0 To 20
35 Frequency
Selection For Frequency Lower than 300Hz select
frequency type low. - Low, High
36 Pulse width To set width of input pulse in low
frequency mode. 2 0 To 50
Sr.
No. Name Description No Of
Digit Lo Limit Hi Limit
1 Batch Mode Type Of Mode, For Flow Control - Normal, Counter
2 Input Type Type Of Input - 0-5V, 1-5V, 0-20mA, 4-20mA ,
Pulse
3 Type Of
Instrument Type Of Instrument, Which You Want To
Use. - Indicator/
Totaliser
4 Square Root Mode Of Linearization - Yes/No
5 Digital Input To Be Used To Reset Batch Total,
Integration total & to start batch and to
stop batch Yes/No
6 Digital Filter If Yes Than In Programming Mode It Will
Show Filter No. - Yes/No
7 Time Base For Calculation/Display Of Flow Rate - Sec, Min, Hour, Day
8 Chnl1 ZR Zero Value 5 00000 99999
9 Chnl1 FS Full Scale Value 5 00000 99999
10 No Of
Batches 2 00 99
11 Batch Count Counter Will Count How Much Batches
Has Been Taken 2 00 99
12 Relay Mode Two Type Of Mode - Normal, Failsafe
13 Cut Off 3 000 100
14 DP Decimal Point - 0,0.1,0.01,0.001
15 SF1 Full Scale For Channel 1 4 0000 9999
16 SF2 Full Scale For Channel 2 6 00.00 99.99
17 SF3 Full Scale For Channel 3 6 000.0 999.9
18 Pcns Pressure constant 5 000.00 999.99
19 tcns Temperature constant 5 00000 99999
20 F2E Channel #2 Linearization mode - Sqrt / No sqrt
21 ConE Channel #3 Linearization mode - Sqrt / No sqrt
22
Zp
Zero setting for Channel-2 5 000.00 999.99
23 Zt Zero setting for Channel-3 5 0000.0 9999.9
24 F1E Channel #1 Linearization mode - Sqrt / No sqrt
25 Baud Rate - 9600,19200
26 Serial No 2 01 TO 99
27 Pout 4 0001 TO 9999
28 Default
Display - Batch Total/Integration Total
(Bat Tot/Int Tot)
29 Pass 4 0000-9999
30 Conversion
Factor 4 00.00-99.99
31 Clear
Total To Clear Integration /Batch Total And
Roll Count 4
“PASS” & 0000-9999