35 | 50
Installation Manual LOGS50 EN_MI_090221
1.13
ANALOG INPUTS
LOGS50 integrates a maximum of four analog inputs. As explained before,
these inputs can make use of the 24 or 12 VDC power supply generated by the
own unit. Signals obtained from each input are acquired by the logger with a 12-
bit resolution. This numeric value is scaled before being stored in the
corresponding associated register. This escalation is fixed by the user and
allows the storage of the current value output in the chosen engineering units-
for example, m3. Each analog input has independent pre and post stabilization
times which are used when a reading task of the input takes place. In case the
four inputs are read simultaneously then pre and post biggest times are used.
