2 | 50
Installation Manual LOGS50 EN_MI_090221
2. POWER SUPPLY
LOGS50 unit has its own internal power supply (lithium battery cells) for its
own operation in autonomous mode through whether lithium primary cells or
via rechargeable accumulators always depending of the model acquired.
Figure 1
:
LOGS50 models. Solar panel rechargeable and with primary battery cells
For these type of autonomous power, 2 3.6 VDC cells in series are required.
To do so, just insert the cells or the rechargeable accumulators in their
battery holders.
LOGS50 models with rechargeable accumulators has available an electronic
circuit for battery cell recharging connected to a solar panel.
Total capacity supported by the system is completed with the use of up to 4
cells paired in group of 2.
Single capacity: 2 cells on clip-holders 1 and 2.
1 + 2, place the batteries in the holders 1 and 2.
Double capacity: 4 cells on clip-holders 1 and 2, and 3 and 4.
1 + 2, place the batteries in the holders 1 and 2.
3 + 4, place the batteries in the holders 3 and 4.
Note: Always place either 2 or 4 cells with the distribution REMARKED.
