MASERMIC IFALL, User Manual

Page: 6 / 28

6
www.masermic.com
2.9. Call centre notifications
The mobile phone or call-centre receives the following event notifications by SMS/GPRS
messages:
a. Device worn/not worn ON/ OFF.
b. Device clipped/unclipped.
c. Low battery level.
d. Very low battery level.
e. Battery depleted.
f. Battery charger unplugged.
g. Battery charge full.
h. Battery charge started.
i. Panic/fall alarm.
j. Security perimeter alarm.
k. User GPS location (under request).
l. Firmware version (under request).
2.10. Remote configuration
The device can be configured by SMS commands or using the App iFALLDET-C. The following
features can be configured:
a. Battery levels.
b. Alarm cancellation.
c. Telephone numbers and addresses for communications.
d. Password.
e. Security perimeter.
f.
GPS position request.
g. Activate/deactivate fall detection.
h. Activate/deactivate the panic button.
i.
Restart the device.
j. Date/time configuration.
Messages will be parsed and changes implemented only if they do not affect the operation of
the device in that moment, otherwise device will wait until the change has not impact over the
normal operation.
2.11. Firmware update
Device’s firmware can be remotely upgraded via GPRS. It is activated by sending a SMS. The
device automatically downloads the new firmware as long as this does not interfere its normal
functioning. The firmware new version will be installed when the device be connected to the
charger and switched off.
2.12. Security
The SMS communication is secured by the following mechanisms:
a. Whitelist of phone numbers. Only the defined numbers can call the device.
b. Password.