Maserati Touch Control Plus, User Manual, Page: 62 / 124

in the figure, and remove the
dashboard molding beneath and on
the sides of the climate control
panel. This molding is fastened by
means of 10 pins (indicated in the
figure) press-fitted onto clips present
in dashboard structure.
• After removing the molding, take
the screwdriver from the tool kit
under boot mat (see vehicle Owner's
Manual).
• Insert screwdriver tip inside the hole
on LH side of glove box structure:
push until home against actuator
pin.
• Push down screwdriver tip to release
actuator pin and manually unlock
the glove box. The actuator will
remain in this condition until battery
feed is restored.
• Reinstall the molding ensuring that
pins match with the clips of
dashboard structure.
• Press on the molding, always starting
from the central part until all 10 pins
are engaged in their clips and “click”
in place.
After releasing the glove box by means
of this procedure, do not lock glove
box using the PIN code and contact the
Maserati Service Network to have
unlock feature via PIN code checked.
Surround View
Refer to “Surround View Camera
System (optional)” chapter of section 2
in your vehicle Owner's Manual for
function description and details.
Switch OFF Touch screen
Backlight
If the screen backlight becomes
annoying when driving, it is possible to
switch it off.
Switch off the screen backlight by
touching “Screen OFF” soft-key in
“Controls” screen of MTC+ display.
Inner Section
Control and Climate Modes
6
62