Maserati Touch Control Plus, User Manual, Page: 114 / 124

Rearview Camera Delay
By selecting this feature, when the
shift lever is moved out of R (Reverse),
the rear view image with dynamic grid
lines will be displayed for up to 10
seconds after shifting unless the
forward vehicle speed exceeds 12 km/h
(8 mph), or the transmission is shifted
into P (Park) or the ignition device is
switched to the
OFF position. The
feature can be set “On” or “Off”.
Rearview Camera Dynamic
Guidelines
This feature allows you to see active
guidelines over the rearview camera
display whenever the shift lever is put
into R (Reverse) position.
The image will be displayed on the
MTC+ display along with a caution
note to check entire surroundings
across the top of the screen. After five
seconds, this note will disappear.
Intermittent Wiper Options
By selecting this feature, the system
will automatically activate the
windshield wipers if it senses moisture
on the windshield. The feature can be
set “On” or “Off”.
Hill Start Assist
This feature allows you to disable the
HSA system. The feature can be set
“On” or “Off”.
Lights
Press the “Lights” soft-key to set the
following modes.
Headlamp Off Delay
By selecting this feature, the driver can
choose to have the headlamp off or lit
for 30, 60, or 90 seconds when the
engine is shut off. To change the
current headlamp off delay status,
touch and release the “0”, “30”, “60”
or “90” soft-key to select the desired
time range.
Illuminated Approach
By selecting this feature, the driver can
choose to have the headlamp off or lit
for 30, 60, or 90 seconds when the
doors are unlocked with the key fob
RKE transmitter.
MTC+ Settings
9
114