Maserati Touch Control Plus, User Manual, Page: 61 / 124

must contact the Maserati Service
Network that will reset this feature.
This feature is only available when
vehicle is at a standstill.
Glove Box Lock
• Open “Controls” screen and touch
“Glove Box”.
• To open the screen required to enter
the PIN, answer “Yes” to the prompt.
• Using the keypad, enter the four
digits of the PIN and press “OK”. A
buzzer will sound three tones
indicating that proper PIN code was
entered.
NOTE:
• If you do not enter all PIN digits, a
prompt and a buzzer will indicate
that you should do so.
• In case of incoming call while
entering the PIN, the MTC+ system
will temporarily stop the release
function. As soon as the barge-in is
over, the keypad screen will be
displayed again so that you can
enter the PIN.
• Confirm entered code by touching
“OK” in the next page. Glove box is
now locked and the MTC+ will go
back to “Controls” page.
Glove Box Unlock
If the glove box is locked, when you
enter in the vehicle, the MTC+ screen
will display the page already shown
during the locking procedure, on
which a message will indicate that
system operation is reduced and that
only “Climate”, “Controls” and
“Settings” features are active.
Unlock glove box by entering the lock
code as previously specified.
Glove Box Manual Unlock
If battery is flat, it is necessary to
manually work the actuator on the LH
side of the glove box to unlock the
glove box that has been locked using
the PIN code.
• Proceed carefully and start with the
central part, indicated by the arrow
Control and Climate Modes
6
61