Maserati Touch Control Plus, User Manual, Page: 102 / 124

• Select the “Messaging” soft-key,
then “New Message”.
• Select one of the 18 preset messages
and the person to whom you want to
send the message.
• If more than one number is available
for the receiver, select the number to
which you want to send the message.
• Touch “Send” or “Cancel”.
Voice Controlled Messaging
• Touch the phone soft-key on the
touch screen or press the same
button on the steering wheel.
• After the “Listening” message and
following beep, say “Send message
to John Smith mobile”.
• When the system indicates the
message to be send, deliver the
desired message, or “List”. There are
18 preset messages.
While reading the list of decided
messages, you may interrupt the
system by pressing the
button and
deliver the message you wish to send.
After the system has confirmed that
you want to send the message to John
Smith, it will proceed with the
sending.
List of preset messages:
1. Yes
2. No
3. Okay
4. I can't talk right now
5. Call me
6. I'll call you later
7. I'm on my way
8. Thanks
9. I'll be late
10. I will be (number) minutes late
11. See you in (number) minutes
12. Stuck in traffic
13. Start without me
14. Where are you?
15. Are you there yet?
16. I need directions
17. I'm lost
18. See you later
Bluetooth
®
Communication
Link
Mobile phones have been found to
lose connection to the MTC+ System
Phone. When this happens, the
connection can generally be
re-established by switching the mobile
phone OFF/ON. Your mobile phone is
recommended to remain in Bluetooth
®
ON mode.
Power-Up
After switching the ignition device
from
OFF to either the RUN or ACC
position, or after a language change,
you must wait at least 15 seconds prior
to using the system.
MTC+ System Phone
8
102