Maserati Grecale 2022, Owner'S Manual

Page: 170 / 324

5
168
Starting and Driving
• CORSA (TROFEO version only): to
activate/deactivate the sportier and
the race drive mode. When in "CORSA"
drive mode, in addition to what
indicated for the sports mode, the
transmission use a specific gear shift
pattern and the traction is shifted more
on the rear wheels with increased over
steering behaviour. Traction control
with dedicated calibration to maximize
traction vs stability and "Launch
Control" start mode.
• ESC OFF: to exclude the ESC system.
• (Suspension) button ( ): to switch
between the two suspensions setting
modes: SOFT, SPORT and HARD.
By rotating clockwise or
counterclockwise the Drive Mode
selector, a pop-up is shown in the left
dial of the instrument cluster displaying
all the possible drive modes (the
selected one is highlighted) together
with the relative suspension soft key on
the instrument cluster, if not in default
mode.
Refer to chapter "Instrument Cluster
Overview" in section "Instruments and
Controls" for further information.
Setting the Drive Mode
Drive modes can be set using the
selector on the steering wheel.
Drive mode selector is a rotary knob that
select each drive mode both clockwise
and counterclockwise.
Selected mode lasts untill changed or
untill key off. At key on default "GT"
mode is always the predominant mode.
NOTE:
A different drive mode can be set even
with engine running and vehicle in
motion.
To activate a drive mode, switch the
selector as indicated below.
COMFORT Mode
COMFORT Mode is set in "SOFT" trim.
Pushing the
button, a white telltale
will be displayed on the instrument
cluster, switching in "SPORT" trim.
NOTE:
• Comfort Mode is selectable switching
the drive mode selector from OFF
ROAD rotating the knob once
clockwise or GT rotating the knob once
counterclockwise.
• SPORT and CORSA are not selectable
starting from COMFORT Mode.
Sailing function (MHEV only)
The vehicle has a "sailing" function,
which is available in driving mode
Comfort and provides fuel savings. The
function is automatically activated
by the driver when the accelerator is
released below a certain vehicle speed,
without simultaneously pressing the
brake pedal.
The sailing function is active when the
accelerator pedal is released only if the
speed is below 160 km/h (100 mph).
In this condition, the engine returns to
its idle state and the car decelerates
without the engine applying resistance