Maserati Ghibli 2021, Owner'S Manual

Page: 27 / 382

2
25
Understanding the Vehicle
ignition device into the ACC or RUN
position.
• The easy entry/exit function is
disabled when the driver seat
position is less than 80 mm (3.15
in) forward of the rear stop. In this
position, there would be no benefit
to the driver by moving the seat for
easy exit or easy entry.
Each stored memory setting will have
an associated easy entry/exit position.
NOTE:
The "Easy Entry/Exit" function can be
enabled or disabled using the MIA
system, refer to “Function of Settings
Menu on MIA” in section “Dashboard
Instruments and Controls” for further
information.
Rear Seats
Rear seats can fit three passengers.
Seats, head restraints and seat belts
are parts of the occupant restraint
system of the vehicle.
WARNING!
Be sure everyone in your vehicle is in a
seat and using a seat belt properly.
NOTE:
For further information, : chapter
“Occupants Restraint Systems (ORS)”
and "Head Restraints" in section
“Safety”.
Rear Seat Folding Seatback
The 60/40 split-folding seatback of
the rear seat provides for a recliner
function with three available fixed
positions that can be set using the
lever on seat external side. The LH
lever tilts the long part (60), while the
RH lever tilts the shorter one (40).
The less tilted position (90
°
) is the one
most suitable when a child seat must
be installed; the other positions tilt the
seatback toward the liftgate up to 23
°
.
To tilt the seatback, lift the lever from
its rest position 0 to position
1 while
pushing the seatback to the back until
reaching the required position. When
releasing the lever, the fixed positions
will be acknowledged by lever control
cable clicking in place to lock.
Ensure that seatback is fastened to the
position by trying to move it back and
forth. Lever control cable locks also
when fully folding the seatback down
on the seat.
To move the seatback in another
position, lift the lever to position
1
and hold it up until bringing seatback
to the new fixed position, which is
acknowledged by the cable locking in
place when releasing the lever.
WARNING!
•
Ensure the seatback is always locked
in one of the fixed positions before
fastening the rear seat belts. An
unlocked seatback cannot ensure the
necessary stability for passengers