Maserati Ghibli 2021, Owner'S Manual

Page: 94 / 382

3
92
Before Starting
(Continued)
• The buttons of the power
liftgate/Hands free do not work if a
gear is engaged or if the vehicle
speed is higher than 0 km/h or mph.
• The power liftgate/Hands free does
not work with temperatures lower
than
−
30
°
C (
−
22
°
F) or higher than
65
°
C (150
°
F).
• If the opening buttons or the handles
are operated while the power
liftgate/Hands free is closing, the
stroke of liftgate stops. Pressing
another time the same command it
reverses movement and fully open.
• If the opening buttons or the handles
are operated while the power
liftgate/Hands free is opening, the
motor of the liftgate is disabled to
allow manual operation.
• If the power liftgate/Hands free
finds several obstacles during the
same operating cycle, it will stop
automatically and must be opened or
closed manually.
• If the power liftgate/Hands free is
closing and a gear is engaged, the
liftgate will continue closing. In this
condition, it is possible that, during
the closing stroke, it may find an
obstacle and stop.
WARNING!
If, for any reason, the liftgate must
remain open while driving, close all
the windows and activate the fan of
the air conditioning control at the
maximum speed. Do not activate
recirculation.
Set the Position of Maximum Power
Liftgate Opening
The maximum opening position of
the liftgate can be modified using
the previously described buttons
on the outer left edge of the boot
compartment.
1.
Activate the liftgate and stop it
in the new maximum opening
position to be set, by pressing the
upper
button.
2. Press the upper or lower
buttons and keep it pressed for 3
seconds.
3. Release the button (pressed in
the previous point). Upon the
following opening controls, the
liftgate will stop in the stored
position.
If you want to reset the maximum
possible opening position of the
liftgate, proceed as described below
starting from the previously set
opening position.
1.
Manually push the liftgate to
the maximum possible opening
position.
2. Repeat the previously performed
steps 2 and 3.
Power Liftgate/Hands Free Automatic
Safe Movement
Power liftgate/Hands free safe
opening and closing is ensured by
a protection system able to stop
its movement when an obstacle
is detected along the path:
when opening or closing, it stops
automatically and then slightly moves
back.
Along the upper outer edges, the
vehicle can be equipped with anti-
pinch protection sensors. These sensors
stop the automatic closing stroke
and partly open the liftgate when a
pressure is carried out, also slight,
within their range shown in the figure.