Maserati Ghibli 2021, Owner'S Manual

Page: 134 / 382

4
132
Dashboard Instruments and Controls
System reaction force can be set to
“Low”, “Medium” (default mode)
and “High”.
See “Lane Keeping Assist - LKA” in
section “Driver Assistance Systems”
for more details.
• Blind Spot Alert
Activating this function the system
will try to prevent collision between
host vehicle and potential blind spot
collision hazard.
This function can be set in “Off”,
“Lights” or “ Chime”.
See "Blind Spot Assist - BSA” in
section “Driver Assistance Systems”
for more details.
• Active Blind Spot Assist
Activating this function the system
will try to prevent collision between
host vehicle and potential blind spot
collision hazard. System applies direct
input to electric power steering
system to change direction of vehicle
to avoid collision.
Driver warnings can be only “Visual”,
“Visual & Acoustic” (default mode) or
“Visual & Haptic”.
System response can be set to
“Early”, “Medium” (default mode)
and “Late”.
System reaction force can be set to
“Low”, “Medium” (default mode)
and “High”.
See “Active Blind Spot Assist - ABSA”
in section “Driver Assistance Systems”
for more details.
• Park Assist
The park assist system will scan for
objects behind and in front of the
vehicle when the transmission shift
lever is in R (Reverse) and the vehicle
speed is less than 12 km/h (7.5 mph).
The system can be enabled with
“Sound Only", “Sound+Display”, or
turned “Off”. See “Park Assist” in
section “Driver Assistance Systems”
for further information.
• ParkSense Front Sensors Active in
Drive
If this function is active, when driver
takes shift lever from P (Park) or N
(Neutral) to D (Drive), front parking
sensors are activated. If this function
is not active, when driver takes shift
lever from P (Park) or N (Neutral) to D
(Drive), front parking sensors are NOT
activated.
• Front ParkAssist Volume
When this function is selected,
the chime volume of front park
assist sensors can be set to “Low”,
“Medium” or “High” level.
“Medium” is the default setting.
The system will retain its last known
configuration state through ignition
cycles.
• Rear ParkAssist Volume
When this function is selected,
the chime volume of rear park
assist sensors can be set to “Low”,
“Medium” or “High” level.
“Medium” is the default setting.
The system will retain its last known
configuration state through ignition
cycles.
Clock & Date
Time is always visible on the
dashboard analog clock (see “Analog
Clock” in this section) and in digital
format on the instrument cluster and
on the MIA display.