- 20
PD 50 YS
GB
GB
3.8 I
NSIDE
INSTALLATION
Correct indoor installation of the system must observe the following installation requirements:
-
The site must be adequately dimensioned in order to allow correct operation of the group as well as easy access
for routine maintenance operations and eventual repairs. The figure shows the minimum recommended
dimensions for clearance around the system and the height of the site.
-
Access to the site must allow the introduction of the complete system using standard transport and handling
devices available in the premises.
-
There must be apertures of adequate dimensions to ensure continual and efficient recirculation of air.
-
Installation of exhaust piping to the exterior of limited length and the fewest possible number of curves is
compulsory.
-
The system may be arranged with sufficient passage space on at least three sides, provided that easy access
and observance of safety regulations are maintained.
-
The control panel (for automatic sets) must be positioned so that the instruments are clearly visible to the
operator working near the system (for example, see figure below).
List
1 - Painted plate case
2 - Control panel
3 - Foundation
4 - Cables duct
5 - Air intake
6 - Exhaust gas pipe
7 - Air outlet with fan
Indoor installation
