background image

8

 

P/N 27740 

10/11

CUstoMEr sErVICE

For product and installation questions, DO NOT return to the store. For additional help contact customer service:

 If you purchased products in the U.S. and need additional help, please contact Masco Bath.  

Visit 

 www.mascobath.com, e-mail [email protected], or call 

 1-800-355-2721

• Masco Bath • Moorestown, NJ 08057

 If you purchased products in Canada and need additional help, please contact Mirolin Industries.   

Visit 

 www.mirolin.com, e-mail [email protected], or call 

 1-800-647-6546 

• Mirolin Industries • 60 Shorncliffe Road • Etobicoke, Ontario M8Z 5K1

CarE aND CLEaNINg

For regular cleaning use ONLY mild detergents or warm, soapy water. Use ONLY non-abrasive cloth or sponge. Always rinse 

surfaces after cleaning.
Before cleaning this product with cleaning products, test a small, inconspicuous area.  

 

CAUTION: 

The manufacturer does not recommend the use of cleaning products that contain any of the following 

chemicals. Use of products containing these chemicals can cause the product to crack or discolor and will void the warranty.

 

Naphtha

 

Amyl Acetate

 

Hydrogen Peroxide Solution (common household peroxide)

 

Toluene

 

Ethyl Acetate

 

Lye (common in drain cleaner)

 

Acetone

LIMItED WarraNty

Please refer to the product label (located on the carton) to outline your model’s limited warranty period. The manufacturer 

warrants to the original consumer purchaser that its products will be free of defects in materials and workmanship, subject 

to the limitations, exclusions and conditions that follow, from date of original purchase as shown on purchaser’s receipt. The 

manufacturer will, at its discretion, replace or repair FREE OF CHARGE except as noted below, during the warranty period, 

any part that the manufacturer determines to be defective in material and/or workmanship under normal installation, use 

and service. The original consumer purchaser must notify the manufacturer in writing of any defect covered by the warranty. 

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY MADE BY THE MANUFACTURER. ANY CLAIMS MADE UNDER THIS 

WARRANTY MUST BE MADE DURING THE PERIOD REFERRED TO ABOVE. MANUFACTURER MAKES NO IMPLIED WARRANTY OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. LABOR CHARGES AND/OR DAMAGE INCURRED IN INSTALLATION, 

REPAIR OR REPLACEMENT AS WELL AS INCIDENTAL AND CONSEQUENTIAL DAMAGES CONNECTED THEREWITH ARE EXCLUDED 

AND WILL NOT BE PAID BY THE MANUFACTURER. Some states do not allow limitations on how long an implied warranty lasts, or 

the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. 

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty is 

void for any damage to this product due to misuse, abuse, neglect, accident, improper installation, modification, unauthorized 

repair, or any use violative of instructions furnished by us.

Summary of Contents for Aqua Glass ASB Eleganza 48"





























Reviews: