7
P/N 27740
10/11
WaLL sEt INstaLLatIoN (Continued)
13. Secure Side Panel
Side
flange
Top flange
Shim
Less than
1/8" gap
1-1/4" screws
(panhead or roundhead)
◘
Install side panel, pushing hooks into back panel slots,
pressing firmly into corner and against studs. Push down
until panel tops are even.
IMPORTANT!
Gaps between fl anges and studs must be
less than 1/8". Insert shims to fi ll gaps.
◘
Secure top and side flanges to studs with 1-1/4" screws.
CAUTION:
Use panhead or roundhead screws. Do not
overtighten screws, this can cause panel to crack.
◘
Repeat steps 12 and 13 to secure other side panel.
14. Brace Side Panels
◘
Install temporary braces to hold side panels tight against
studs while adhesive dries.
◘
Protect surface of wall set where it will contact braces.
CAUTION:
Braces should be placed on wall studs to
prevent wall panel defl ection.
IMPORTANT!
Follow manufacturer's instructions for
adhesive dry time before removing brace.
15. Apply Sealant
Finished
wall
APPLY SEALANT
to all seams.
IMPORTANT!
Follow manufacturer’s instructions for
sealant dry time before use.
◘
Install plumbing fixtures and fittings per manufacturer’s
instructions. Check for leaks at all connections before use.
CAUTION:
If installing fi nished wall material, do not
screw into fl anges or product damage will occur.
