Installation
M
Z
010
English
3
87
3.3 Installing the brake system
Installing the brake system is a very delicate
operation that must be carried out by specialized
personnel.
ATTENTION
Marzocchi does not guarantee the assembly
and refuses all responsibility for damages
and/or accidents that may be caused by an
incorrect assembly.
Improper installation of the disk brake
system can overstress the caliper
mountings, which may break. The brake
system assembling must be carried out in
compliance with the brake system’s
manufacturers instructions. Improper
installation may jeopardize the safety of the
rider.
Only use brake systems that are complying
with the fork’s specifications, considering
that:
• On the MZ and TXC forks the V-Brake
system adapters are integrated into the
monolith casting.
• On Ø 32 mm stanchions forks you can
exclusively assemble disk brake systems.
• The EXR forks can be previously provided
with disk brake assembling accessories or
with Cantilever or V-Brake systems
assembling accessories. Specialized
personnel only can change one brake
system type into the other one. On the
bolts thread (A) a special thread-lock
treatment is applied; removed bolts can
therefore never by reused, as they lose
such treatment.
• In case of assembling of disk brake
system, make sure before every ride that
the brake system tubes do not interfere
with the moving parts and on the models
provided with the proper mounting (EXR
(B), DropOff Comp and Triple (C)) the tube
is correctly connected to the mounting
itself.
A
B
C
Summary of Contents for QR20 Plus
