Adjustments
M
Z
010
English
5
96
5.1.3 Air preload
ATTENTION
To inflate your fork, use only the special
MARZOCCHI pump with pressure gauge,
which you can buy at the authorized centers.
Use of improper tools might lead to
improper inflating and cause improper
function or damage to the fork itself.
NOTE
If you need to reduce the pressure inside the
fork’s leg, just push lightly on the valve pin, by
means of a pointed object.
Apply the same preload pressure on both legs.
By pressurizing air through the valve (
A
), you
can adjust the damping of the forces generated
during the COMPRESSION phase.
If you increase the pressure inside the fork’s leg,
you increase the preload. To do so, you need to:
• remove the dust cap (
B
).
• fully tighten the threaded pump adapter.
• inflate air up to the required pressure.
• refit the dust cap (
B
).
ATTENTION
Respect the suggested pressures:
• Spring forks: see Table - Recommended
air pressure for spring forks.
• Air forks: see Table - Recommended air
pressure for air forks.
MZ
0
10014
B
A
MZ
010
015
B
A
Summary of Contents for QR20 Plus
