12
FIG. 21
Lubricate the dust seal (5) and insert it into the top of the slider.
PUMPING ROD
FIG. 22
Fit the lower (32) and upper (33) rings on the pumping rod (30).
Insert the pumping rod into the bottom of the stanchion, ring side first.
Push it into the stanchion, pressing the rings with your fingers.
SEAL PACK
FIG.23
Insert the lower Parker seal (25) with the hollow side downward into the
pack (24) from the OR seat side. Fit the upper Parker seal (25) with the
hollow side upward.
Fit the OR (23) duly greased in the pack outer seat.
FIG. 24
Screw the driver (C) on the pumping rod.
Insert the rebound spring (29), the upper washer (27) and the seal pack
(24) with the OR (23) side toward the inside.
5
33
30
30
32
25
25
23
24
29
24
23
C
27
FIG. 22
FIG. 21
FIG. 23
FIG. 24
