background image

4

O

WNER

S

 

INFORMATION

I

MPORTANT

Installing a M

ARZOCCHI

 suspension system is a very delicate operation that must be carried out with extreme

care. These installation and maintenance instructions are designed for experienced bicycle mechanics and
must be followed exactly as written and specified. Failure to precisely follow these instructions could cause
damage to one or more components of the M

ARZOCCHI

 suspension system. This damage may not be readily

visible or apparent and could lead to unexpected failure on one or more components of your suspension
to such extent that the rider may loose control of the bicycle and suffer severe injury.

T

HE

 

RESPONSIBILITY

 

OF

 

THE

 

OWNER

1) The M

ARZOCCHI

 suspension system is designed to absorb the shocks of an uneven road surface in order

to give the rider more control over this bicycle. It is not designed to absorb the forces generated by jumps
or other acrobatic maneuvers. If you subject the M

ARZOCCHI

 suspension system to repeated jumps or

other acrobatic maneuvers, you could cause one or more of the components of the suspension system
to unexpectedly break, resulting in a loss of bicycle control and serious injury to the rider.

2) Some of the parts of the bicycle, such as the brakes, steering, tires, wheel assembly and shifters may

not have been adjusted at the time the M

ARZOCCHI

 suspension system was installed on the bicycle. Before

you ride the bicycle, be sure all the parts of the bicycle were properly adjusted and functioning properly.

3) All of the components of the suspension system must be correctly assembled and tightened exactly to

the specified torque values. Periodically check the torque of these components to insure that they are
correct. Failure to properly assemble and tighten the components could cause one or more of the
components to unexpectedly break, resulting in a loss of bicycle control and serious injury to the rider.

4) There are obvious risks associated with mountain biking and other types of bicycle riding. Despite the

use of all safety equipment for the bicycle and the rider, either injuries or damages may occur. This is
the responsibility of the rider. To reduce the risk of injury, all activities must be under proper
supervision and only after proper training and experience. Good physical condition of the rider and the
good state of the bicycle are essential to be a safe and successful rider.

5) Be sure to read and follow all the instructions and warnings which originally accompanied your bicycle.

In addition, it is recommended for added safety and protection while riding that a good quality bicycle
helmet be worn and that other safety devices such as lights, reflectors, or reflective clothing be used.
Some cities and states may require the use of a helmet and other safety equipment. Follow all traffic
rules and all other laws about safety equipment and use your bicycle where you are permitted to ride.

6) For any further information you might need, please call or write to this addresses:

I

T

 

IS

 

YOUR

 

RESPONSIBILITY

 

TO

 

MAKE

 

SURE

 

THE

 

ASSEMBLY

 

INSTRUCTIONS

 

IN

 

THIS

 

BOOK

 

ARE

 

PRECISELY

 

FOLLOWED

.

A

LWAYS

 

RIDE

 

SAFELY

 

AND

 

CAREFULLY

.

MARZOCCHI S.

P

.

A

.

via Grazia, 2
40069 Lavino di Zola Predosa (Bologna) - Italy

☎ 

051/6168711 - Fax 051/758857

[email protected]
www.marzocchi.com

MSC CORPORATION USA

25213 Anza Drive - Unit 100
VALENCIA, CA 91355

☎ 

+1 (661) 257.6630 - Fax +1 (661) 257.6636

[email protected]

Summary of Contents for Bomber 2000





















Reviews: