Page 15
mPower 300 Series (Rev G)
4 Installation
4.1 Transport and Storage
4.1.1 Transport
•
The handles on the front side of the unit are not for carrying!
•
Because of its weight, transport by hand should be avoided where possible. If unavoidable then
only the housing should be held and not on the exterior parts (handles, DC output terminal, rotary
knobs).
•
Do not transport when switched on or connected!
•
When relocating the equipment use of the original packing is recommended
•
The unit should always be carried and mounted horizontally
•
Use suitable safety clothing, especially safety shoes, when carrying the equipment, as due to its
weight a fall can have serious consequences.
4.1.2 Packaging
It’s recommended to keep the complete transport packaging for the lifetime of the power supply for relocation or return to
the manufacturer for repair.
4.1.3 Storage
In case of long term storage of the equipment, it is recommended to use the original packaging or similar. Storage must
be in dry rooms, if possible in sealed packaging, to avoid corrosion through humidity—especially to internal components.
4.2 Unpacking and Visual Check
After every transport, with or without packaging, or before commissioning, the equipment should be visually inspected for
damage. An obviously damaged unit (e.g. loose parts inside, damage outside) must under no circumstances be put into
service.
