MARUTI SUZUKI Omni Owner'S Manual Download Page 32

Page: 32 / 97

797-74E-I

6-5

OTHER CONTROLS AND EQUIPMENT

SUN VISOR

INTERIOR LIGHT SWITCHES

The sun visors can be pulled down to block
glare coming through the wind screen.

Front/Center Interior Light
These light switches have three positions
which function as described below:

The light comes on and stays on
regardless of whether the door is open
or closed.

The light comes on when the door is
opened.

The light remains off even when the
door is opened.

NOTE:
Only front doors are involved in lighting
operation of interior lights.

797-06-011

797-06-012

797-06-013

VENTILATOR

Two ventilators, one each on left and right
side, are provided. Fresh air will flow
through the vehicle when it is moving. Air
flow can be regulated by changing the
opening of the ventilator outlet grill.

Summary of Contents for Omni


































































































Search results

Summary of Contents for Omni

Reviews:

Related manuals for Omni

Brands by name

Popular brands

MARUTI SUZUKI Omni, Owner'S Manual

Search results

Summary of Contents for Omni

Reviews:

Related manuals for Omni

Brands by name

Popular brands