manualshive.com logo in svg

MARUTI SUZUKI Omni, Owner'S Manual, Page: 22 / 97

Share
Download
MARUTI SUZUKI Omni Owner'S Manual Download Page 22

34

797-74E-I

INSTRUMENT PANEL

5-5

Main Beam (High Beam) Indicator Light
This indicator comes on when headlight
main beams (high beams) are turned on.

70F-03-012

SPEEDOMETER/ODOMETER

1

Speedometer

2

Odometer

The speedometer indicates vehicle speed in
km/h. The odometer records the total
distance the vehicle has been driven.

Keep track of your odometer reading
and check the maintenance schedule
regularly for required services.
Increased wear or damage to certain
parts can result from failure to
perform required services at the
proper mileage intervals and your
warranty rights may be affected.

797-05-004

w

w

w

w

w

  CAUTION

Turn Signal Indicators
When you turn on the left or right turn
signals, the corresponding green arrow on
the instrument panel will flash along with the
respective turn signal lights. When you turn
on the hazard warning switch, both arrows
will flash along with all of the turn signal
lights.

70F-03-011

Summary of Contents for Omni


































































































Reviews:

No comments