MARUTI SUZUKI Omni, Owner'S Manual

Page: 20 / 97

32
797-74E-I
INSTRUMENT PANEL
5-3
WARNING AND INDICATOR LIGHTS
Brake fluid level warning light
This light operates under two conditions: 1)
when the ignition switch is turned to the
“ON” position, or 2) when the fluid in the
brake fluid reservoir falls below the specified
level. The light should go out after starting
the engine. If the light does not go off or
comes on whilst you are driving, it may
mean that there is something wrong with the
vehicle’s braking system. If this happens,
you should:
1) Pull off the road and stop carefully.
Remember that stopping distance may
be longer, you may have to push
harder on the pedal, and the pedal
may go down farther than normal.
2) Test the brakes by carefully starting and
stopping at the side of the road.
3) If you determine that it is safe, drive
carefully at low speed to the nearest
dealer for repairs.
or
4) Have the vehicle towed to the nearest
dealer for repairs.
If any of the following conditions
occur, you should immediately ask
your MARUTI dealer to inspect the
brake system.
• If the brake fluid level warning light
does not go out after the engine
has been started.
• If the brake fluid level warning light
does not come on when the ignition
switch is turned to the “ON”
position.
• If the brake fluid level warning light
comes on at any time during vehicle
operation.
w w w w w
WARNING
w w
w w w
WARNING
70F-07-029
Oil Pressure Light
This light comes on when the ignition switch
is turned on, and goes out when the engine
is started. The light will come on and remain
on if there is insufficient oil pressure. If the
light comes on when driving, pull off the
road as soon as you can and stop the
engine. Check the oil level and add oil if
necessary (see pages 9-7 and 9-8). If there
is enough oil, the lubrication system should
be inspected by your MARUTI dealer before
you drive the vehicle again.
70F-03-007