manualshive.com logo in svg

MARUTI SUZUKI Omni, Owner'S Manual, Page: 63 / 97

Share
Download
MARUTI SUZUKI Omni Owner'S Manual Download Page 63

75

797-74E-I

INSPECTION AND MAINTENANCE

9-10

GEAR OIL

Specified Transmission/Differential oil
When adding gear oil, use the appropriate
viscosity and grade as shown in the chart
below. We highly recommend you use API
GL-4 SAE 75W-90, 80W-90 or 90 gear oil.

  Type of oil

Gear oil, API GL-4

70F-07-013E

Oil filler and level plug 

1

Tightening torque: 4.3 kg-m (31.0 lb-ft)

Transmission Oil/Differential oil level
check
To check the gear oil level, use the
following procedure:
1) Park the vehicle on a level surface with

the parking brake applied.

2) Clean casing around oil filler plug to

remove risk of any loose dirt or debris
entering oil filler plug hole. Remove the
oil filler plug 

1

.

3) Feel the inside of the hole with your

finger. If the oil level comes up to the
bottom of the plug hole, the oil level is
correct. If so, reinstall the plug.

797-09-004E

797-09-003E

Oil filler and level plug 

1

Tightening torque: 4.0 kg-m (29.0 lb-ft)

Summary of Contents for Omni


































































































Reviews:

No comments