34
The event log menu
By pressing on the menu of “Event log”, the display would enter the next event
menu tree.
All the previous events, alarm and fault have been recorded here. The information
includes the illustration, the event code, and the precise time of UPS when the event
happened. By press or <300ms, all the events could be displayed one by one.
The max number of record is 100, when the number is larger than 100, the latest will
replace the previous.
By pressing ESC >300ms, the display would return the last main menu tree.
The control menu
By pressing on the menu of “Control”, the display would enter the next control
menu tree.
Start Battery Test: this is one command that control the UPS to do the battery test.
Reset Fault status: when fault occurs, UPS would keep in Fault mode and alarm. To
recover to normal status, enter this menu to reset error status, then UPS would stop
alarm and recover to bypass mode. And the reason of fault should be checked and
deleted before UPS is turned on again by manual operation.
Restore factory settings: all the settings would be recover to default factory settings. It
could only be done in Bypass mode.
Summary of Contents for Tacoma II Series
Page 21: ...21 LV mode 2 HV mode When 3 UPSs in parallel JP1 JP2 wiring as below ...
Page 35: ...35 ...
Page 37: ...37 ...
Page 52: ...52 614 40089 00 ...
