Martronic Engineering Laser Tech 304, Operating Manual

Page: 4 / 8

2
Menu Items
It is important to check all your menu item settings before you use
your system to ensure it will work properly. It is recommended to
write down your individual settings for future reference.
To enter the MENU ITEMS push and hold the SELECT button and then
push the AUTOBLADE button. The number on the left will flash and the
number on the right will remain solid. The number on the left is the menu
item and the number on the right is the value that menu item is currently
set at.
To change a menu item press the (+) or (-) to the menu you want to set
per the list below and press SELECT. The number on the left will now
be solid and the number on the right will be flashing. Press the (+) or (-)
to change the value and then press SELECT.
To exit the menu items, push the AUTOBLADE button.
To reset all settings back to factory settings unplug the power cord, press
and hold the (-) button and plug the power back in.
Menu Item # Setting Information
0
Sensitivity of Center Channel Filtering
Choose from 00 to 20
(Default setting is 03)
1
Valve Speed Down - Down Speed Near Center
Choose from 00 Slowest - 25 Fastest
(Default setting is 10)
2
Valve Speed Up - Up Speed Near Center
Choose from 00 Slowest - 25 Fastest
(Default setting is 12)
3
Mast Speed - Up/Down Speed of Mast
Choose from 00 Slowest - 10 Fastest
Any number above 10 removes brake feature
(Default setting is 5)
4
Elevation Units
01- Inches
02- Feet
03- Meters
(Default setting is 02)