background image

2

IMPORTANT SAFETY INSTRUCTIONS!

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manu-
facturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, 
or other apparatus (including amplifiers) that produce heat. 

Do not defeat the safety purpose of the polarized or grounding-type plug. A 
polarized plug has two blades with one wider than the other. A grounding 
type plug has two blades and a third grounding prong. The wide blade or 
the third prong are provided for your safety. If the provided plug does not fit 
into your outlet, consult an electrician for replacement of the obsolete outlet. 

10 

Protect the power cord from being walked on or pinched, particularly at 
plugs, convenience receptacles, and the point where they exit from the 
apparatus.

11 

Only use attachments/accessories specified by the manufacturer.

12 

Use only with the cart, stand, tripod, bracket, or 
table specified by the manufacturer, or sold with 
the apparatus. When a cart is used, use caution 
when moving the cart/apparatus combination to 
avoid injury from tip-over.

13. 

Unplug this apparatus during lightning storms or 

when unused for long periods of time. 

14. 

Refer all servicing to qualified service personnel. Servicing is required when 
the apparatus has been damaged in any way, such as power-supply cord 
or plug is damaged, liquid has been spilled or objects have fallen into the 
apparatus, the apparatus has been exposed to rain or moisture, does not 
operate normally, or has been dropped. 

15. 

To completely disconnect this equipment from the AC mains, disconnect the 
power supply cord plug from the AC receptacle. 

16. 

The mains plug of the power supply cord shall remain readily operable. 

17 

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only 
with the same or equivalent type (AAA). Dispose of dead batteries in accor-
dance with local regulation.

18. 

To prevent overheating, do not cover the apparatus. Install in accordance 
with the manufacturer’s instructions.

19. 

No naked flame sources, such as candles, should be placed on the product.

20. 

Do not expose this apparatus to dripping or splashing and ensure that no 
objects filled with liquids, such as vases, are placed on the apparatus.

21. 

Batteries (battery pack or batteries installed) shall not be exposed to exces-
sive heat such as sunshine, fire, or the like.

22.   For apparatus mounted to wall, the apparatus shall be installed on solid 

wood, bricks, concrete or solid wood columns and battens.

23. 

DO NOT overload wall outlets or extension cords beyond their rated capacity 
as this can cause electric shock or fire.

24. 

Minimum distances around the apparatus for sufficient ventilation.

25. 

The ventilation should not be impeded by covering the ventilation openings 
with items, such as newspapers, tablecloths,curtains, etc.

26. 

Do not ingest the battery, Chemical Burn Hazard.

27. 

Keep new and used batteries away from children.

28. 

If the battery compartment does not close securely, stop using the product 
and keep it away from children.

29. 

If you think batteries might have been swallowed or placed inside any part of 
the body, seek immediate medical attention.

30. 

The battery (battery or batteries or battery pack) shall not be exposed to 
excessive heat such as sunshine, fire or the like.

31. 

Risk of leakage. Only use the specified type of Batteries. Never mix new and 
used batteries. Observe correct polarity. Remove batteries from products that 
are not in use for extended periods of time. Store batteries in a dry place.

32. 

Do not recharge non-rechargeable batteries.

33. 

Avoid exposure to extreme heat or cold.

34. 

This equipment is a Class II or double insulated electrical appli-
ance. It has been designed in such a way that it does not require 
a safety connection to electrical earth.

35. 

Danger of explosion if battery is incorrectly replaced. Replace only with the 
same or equivalent type.

36. 

(The remote control supplied with) This product contains a AAA battery. If the 
AAA  battery is swallowed, it can cause severe internal burns in just 2 hours 
and can lead to death.

37. 

Do not handle leaking or damaged AAA batteries.

The lightning bolt flash with arrowhead 
symbol within an equilateral triangle, 
is intended to alert the user to the pres-

ence of potentially “dangerous voltage” within the 
product’s enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to persons.

The exclamation point within an equi-
lateral triangle is intended to alert the 
user to the presence of important oper-

ating and maintenance (servicing) instructions in the 
literature accompanying the appliance.

Do Not Open! Risk of Electrical Shock. Voltages in this equip-
ment are hazardous to life. No user-serviceable parts inside. 
Refer all servicing to qualified service personnel. To prevent fire 
or shock hazard, do not expose this module to rain or moisture.

Summary of Contents for Crescendo X





















































Reviews: