background image

33

53D9028. Rev 1 03/03

L

IMITED

  W

ARRANTY

FACTORY-BUILT FIREPLACE AND COMPONENTS

(

EXCEPT

 

BLOWERS

)

W

HAT

 

IS

 

COVERED

 

AND

 

FOR

 

HOW

 

LONG

• F

IVE

-Y

EAR

 C

OVERAGE

 - For five years from the date this fireplace and components are first purchased for use,  Martin

Hearth & Heating will, at its option, repair or replace any defective part of this fireplace or components, or refund to you
a sum not to exceed the factory retail price in effect at the time of purchase.

• T

EN

-Y

EAR

  C

OVERAGE

  - From the sixth through the tenth year following the date this fireplace or accessory is first

purchased for use, Martin Hearth & Heating will make available to you, at our factory, a free replacement for any
defective part in this fireplace or accessory.

• T

WENTY

-F

IVE

-Y

EAR

 A

VAILABILITY

 

OF

 R

EPLACEMENT

 P

ARTS

 - From the eleventh through the twenty-fifty year following the date

this fireplace or accessory is first purchased for use, Martin Hearth & Heating will make available at our factory
replacement parts for this fireplace or accessory, which you may purchase for the list price current at the time your
purchase order is received.

W

HAT

 I

S

 N

OT

 C

OVERED

This limited warranty does not cover:

• Transportation or shipping cost.
• The cost of a service call to diagnose trouble.
• Painted surfaces.
• Damage ir defect caused by improper installation, accident, misuse, abuse or alteration.
• Poor ventilation of smoke or gases caused by air-conditioning and heating systems, exhause fans, or pressure

differentials produced by wind.

• Broken glass components
• Cracks in ceramic and castable parts that do not affect safe operation.
• We do not warrant this fireplace to be in compliance with your local building code.  Building codes vary greatly

throughout the country, and you should determine whether your local building code contains restrictions on the use
of this fireplace before you purchase it.

• Blowers or fans, which are warranted separately.
• Heat loss due to the passage of heat or air through or around the fireplace.

Also, under our five year coverage, we do not pay the cost of removal and replacement of any portion of the structure in
which the fireplace is situated, made necessary by the repair, removal or re-installation of the fireplace.

And under our twenty-five year warranty of availability of replacement parts, we only promise to maintain a supply of
replacement parts at our factory for you to purchase.

L

IMITATIONS

 

AND

 E

XCLUSIONS

1.

No one has authority to add to or vary this limited warranty, or to create for Martin Hearth & Heating any other
obligation of liability in connection with this fireplace and accessory.

2.

Martin Hearth & Heating 

SHALL

 

NOT

 

BE

 

LIABLE

 

FOR

 

INCIDENTAL

CONSEQUENTIAL

SPECIAL

 

OR

 

CONTINGENT

 

DAMAGES

 

YOU

 

MIGHT

SUFFER

 

AS

 

A

 

RESULT

 

OF

 

ITS

 

BREACH

 

OF

 

THIS

 

WRITTEN

 

WARRANTY

 

OR

 

ANY

 

IMPLIED

 

WARRANTY

.  Some states do not allow the exclusion

of limitation of incidental or consequential damages, so the above limitations may not apply to you.

3.

This warranty applies only to the original purchaser of the firplace or to the original owner of the dwelling when the
fireplace is installed in a new dwelling and may not be transferred.

5.

This warranty applies only to a fireplace sold and used in the United States.

Summary of Contents for SB5400SS





































Reviews: