16
RUSH® MH 11 Beam
User Manual
Fixture overview
1 2
3 4 5 6
1 – Display
The display is used to configure the fixture and show status.
2 – Control buttons
•
MENU: Press to activate the menu. Within the menu, press to escape
and return to the previous level. Press and hold to exit the menu.
•
DOWN: Press to scroll down through menu options.
•
UP: Press to scroll up through menu options.
•
ENTER: Press to confirm and save the menu selection. Press and hold
to exit the menu.
3 –XLR DMX input/output sockets
For your convenience, 3 and 5-pin XLR sockets are provided for DMX input
and output (through to next fixture). Do not connect output cables to both
the 3-pin and 5-pin output sockets at the same time as this may cause data
errors (in other words, you cannot use the two outputs on the fixture to split
the DMX line).
4
– AC mains power input
A yellow Neutrik True1 PowerCon inlet connector is provided to connect the
fixture to mains power.
5
– AC mains power link output
A yellow Neutrik True1 PowerCon outlet connector is provided to allow
mains power to be linked to the next fixture. Refer to the section above
“Linking fixtures to power in a chain” for safe use of this connector.
6
– Mains fuse
The fixture’s 5T 250 V, 8 A fuse is located in a fuse holder next to the power
input/output connectors.