22
RUSH® MH 11 Beam
User Manual
Blackout during pan/tilt movements
The fixture can be set to black out during pan or tilt movement. To enable
this option:
1. In the FIXTURE SET menu select BI.O.P/T MOVE and press ENTER.
2. Select ON to enable automatic blackout, or OFF to disable it (default).
3. Press ENTER to confirm or press MENU to exit.
Blackout during color/gobo change
The fixture can be set to black out during pan or tilt movement. To enable
this option:
1. In the FIXTURE SET menu select BI.O.OTHER MOVE and press
ENTER.
2. Select ON to enable automatic blackout, or OFF to disable it (default).
3. Press ENTER to confirm or press MENU to exit.
Display backlight auto-dim
The LCD control display automatically dims 5 minutes after the last key
press, but you can change the delay time:
1. In the FIXTURE SET menu select DISPLAY SETTING and press
ENTER.
2. Select BACKLIGHT AUTO and press ENTER.
3. Select a delay from 2 to 60 minutes (default 5 minutes).
4. Press ENTER to confirm or press MENU to exit.
Clear error messages from display
If the fixture detects a fault it will display an error message on the display.
You can clear these messages but you must first enter a password which is
“050”. To enter the password and clear the messages:
1. In the FIXTURE SET menu, select SERVICE SETTING and press
ENTER.
2. Select PASSWORD and press ENTER.
3. Use the UP and DOWN buttons to select PASSWORD=050 and press
ENTER.
4. Select CLEAR ERR. INFO and press ENTER.
5. Select YES to clear the error codes, or NO to keep them.
6. Press ENTER to confirm or press MENU to exit.
Restore to factory settings
To restore all settings to factory defaults:
1. In the FIXTURE SET menu select FACTORY SETTINGS and press
ENTER