2 0
R o b o s c a n P ro 1 2 2 0 - o p e ra t o r ’ s m a n u a l
Use the arrow keys to toggle between on and off. Select 'on', by pressing [enter], if wish the proto-
col auto-detect function to be enabled after switching on the fixture, and 'off' if you wish to disable
the feature.
P A n
This function allows you to invert the pan movement (DMX Protocol only). Use the arrow keys to
toggle between Inu for inverted pan and nInu for non inverted and press [enter] to confirm or
[menu] to cancel. Either way you will return to the SPEC-menu.
t i L t
This function allows you to invert the tilt movement (DMX Protocol only). Use the arrow keys to
toggle between Inu for inverted tilt and nInu for non inverted and press [enter] to confirm or
[menu] to cancel. Either way you will return to the SPEC-menu.
Using the Martin 3032 Controller the Pan and Tilt swap can be enabled from the link configuration
page.
P A t I
This function allows you to swap the pan and tilt channels in DMX. Use the arrow keys to toggle
between SUAP for swapped protocols and n SU for non swapped and press [enter] to confirm or
[menu] to cancel. Either way you will return to the SPEC-menu.
d n L d
For factory programming only - do not use.
r E S
Pressing enter on this option resets the receiver CPU and enables the auto-detect function.
L o F F
This option allows you to enable/disable the 'Lamp Off' function via DMX. Use the arrow keys to
toggle between 'on' and 'off' and select 'on' by pressing [enter] if you wish to enable this feature, and
'off' if you wish to disable the feature.
F A n L
This option allows you to enable/disable the 'Fan Low' function. Use the arrow keys to toggle
between 'on' and 'off' and select 'on' by pressing [enter] if you wish to enable this feature and 'off' if
you wish to disable the feature.
N O T E :
On the Roboscan Pro 1220 ST models, it is not possible to reduce the speed of the tangen-
tal fan located at the rear end of the fixture.