R o b o s c a n Pr o 1 2 2 0 - o p e ra t o r ’ s m a n u a l
19
©
1
9
9
5
-1
9
9
6
M
a
rt
in
P
ro
fe
ss
io
n
al
A
/S
P S E t - P r o t o c o l S e t u p
After switching on a Pro 1220, it will automatically detect whether Martin or DMX signals are
received and use the appropriate protocol type. The PSEt (protocol set-up) function allows you to
switch protocol and/or protocol type afterwards. Use the arrow keys to select the desired protocol
and press [enter] to confirm or [menu] to cancel. Either way you will return to the main menu.
The protocol set-up function is also used to set the default DMX protocol, which is the protocol that
is automatically selected if DMX signals are received right after having switched on the fixture.
The following table shows the protocols available:
S P E C - S p e c i a l F u n c t i o n s
Selecting this function presents you with a menu of special functions. As in the main-menu, you
can browse through the options and select the one displayed by pressing [enter].
d I S P
Use the arrow keys to toggle between on and off. Select 'on' by pressing [enter] if you wish the dis-
play to blackout 2 minutes after the last pressing of any of the keys in order to avoid audience dis-
traction. Otherwise, select 'off'. The blackout function will not affect the appearance of error and
information messages.
A u t o
This option can be used to disable the protocol auto-detect function when switching on the fixture.
Protocol #
Protocol Type
Pan/Tilt
Resolution
Channel
Requirements
CMYR / XR /
RPR
Control Principle
0
Martin RS-485
16 bit
2 / 2 / 2
Vector
1 (
DMX default)
DMX 512
8 bit
15 / 11 / 13
Tracking
2
DMX 512
16 bit
17 / 13 / 15
Tracking
3
DMX 512
8 bit
17 / 13 / 15
Vector/Tracking
4
DMX 512
16 bit
19 / 15 / 17
Vector/Tracking