Martin Roboscan Pro 1220, Operator'S Manual, Page: 18 / 39

1 8 R o b o s c a n P ro 1 2 2 0 - o p e ra t o r ’ s m a n u a l
s e c t i o n 5
T H E P R O 1 2 2 0 C O N T R O L M O D U L E
The control module on the front end of the Pro 1220 offers several features. You can easily set the
fixture address, read the number of lamp hours, enable special soft-features etc. The main-menu is
accessed by pressing the menu key - press [enter]. The display will then show one option at a time.
Use the arrow keys to browse through the different options in the main-menu (Dadr, Adr, PSEt,
SPEC, Po H, LA H, R Po and R LA) and press [enter] if you wish to select one of them. The func-
tions provided are described in the following paragraphs and the function hierarchy is shown
below.
d A d r - D M X 5 1 2 A d d r e s s
Use the arrow keys to select the fixture address when using a DMX controller and press [enter] to
confirm or [menu] to cancel. Either way you will return to the main menu.
A d r - M a r t i n L i n k A d d r e s s
Use the arrow keys to select the fixture address when using a Martin controller and press [enter] to
confirm or [menu] to cancel. Either way you will return to the main menu.
rES
on OFF
dISP
on OFF
Auto
on OFF
LoFF
on OFF
FAnL
St 1 St99
SP 1
St 1 St99
SP16 dnLd
SUAP n SU
PAtI
Inv nInv
tILt
Inv nInv
PAn
SPEC Po H LA H r Po r LA
0-4
PSEt
1-31
Adr
1-512
dAdr
Fixture Address
...............