© Martin Engineering GmbH
32
M3814UK-03/16
Storage, deinstallation, disposal
8
Storage, deinstallation, disposal
8.1
Packing and transportation
The products described here are packed and shipped by Martin
Engineering.
The products may be transported solely in the Martin Engineering
packaging.
The logistics company in charge of the shipment shall be
responsible for any damage and/or loss.
8.2
Storage
To ensure optimal function of the product, Martin Engineering
recommends storing its components in a dry place at room
temperature where they are protected against direct sunlight.
The best storage conditions are at +0 °C to +30 °C and 60% relative
humidity.
Martin Engineering guarantees that the stored products will remain
fully functional for at least 2 years under the storage conditions
specified here.
8.3
Deinstallation
The deinstallation is carried out in the reverse order of the
installation (see Section 5.2.2)
8.4
Disposal
Assemblies and/or single parts of the Martin Engineering products
must be professionally disposed of after usage as follows.
•
Complete assemblies must be dismantled, sorted by
material type, and separately disposed of.
Comply with all nationally and internationally applicable disposal
regulations when disposing of the product.
