6
P3 PowerPort 1500 Safety and Installation Guide
Introduction
Thank you for selecting the Martin P3 PowerPort 1500™. This compact PSU (power supply unit) and data
driver is designed for connection to AC mains power and a Martin P3™ control device. It supplies
low-voltage DC power and relays P3 video display data to products in Martin™ LED-based video systems
such as the VC family. The P3 PowerPort 1500 can be rack-mounted, installed on a flat surface or flown
from a truss using two standard rigging clamps.
For possible system layouts when using the P3 PowerPort 1500™ with Martin™ video products, please see
the user documentation for those products. Martin™ user documentation is supplied with products and
available for download from the Martin™ website at http://www.martin.com, where you can also find the
latest specifications, firmware updates and support information for all Martin™ products.
Martin™ welcomes input from users. Comments or suggestions regarding this manual can be e-mailed to
[email protected] or posted to: Technical Documentation, Martin Professional A/S, Olof Palmes Allé 18,
DK-8200 Aarhus N, Denmark.
Unpacking
The following items are included with the P3 PowerPort 1500:
• Two rack or surface mounting brackets with screws
• Safety wire attachment bracket with screws
• This manual.
Either a mains power cable complete with Neutrik PowerCon power input connector or a separate Neutrik
PowerCon power input connector should be ordered separately from Martin™ (see ”Accessories” on page
18).