background image

6 Product 

overview 

 

 

Product overview 

P r o d u c t   d e s c r i p t i o n  

The Magnum 850 and Magnum 650 smoke machines from Martin provide a 

uniquely flexible and convenient solution to a wide range of smoke requirements 
whether permanently installed or taken on the road. 
 
The machines feature a unique new design that encompasses what the 
Magnum range is all about: state of the art technology, high quality and 

ruggedness. 
 
The Magnum 650 delivers a heavy punch of fog. It’s tough and rugged enough 
to meet the demand of mobile discos and parties. 

 
The Magnum 850 is a higher power fogger suitable for larger venues or night 
clubs. 
 

This manual contains instructions for both the Magnum 650 and 

Magnum 850 machines. Where the Magnum 850 is different, you will 
see this symbol. 

 
Congratulations on your purchase of the Magnum smoke machine from Martin. 
Details of the full range of Martin products are available on our website at 

www.martin.com. 
 

F e a t u r e s   a t   a   g l a n c e  

 

Attractive and rugged design 

 

Machine to machine link (Magnum 850 only) 

 

Continuous operation (at reduced output) (Magnum 850 only) 

 

730W (Magnum 650) / 790W (Magnum 850) 

 

1 litre fluid capacity  

 

Pushbutton remote control (hardwired on Magnum 650) 

 

Optional timer remote (Magnum 850 only) 

 

Thermal fault protection device 

Summary of Contents for Magnum 650






















Reviews: