Troubleshooting
19
Troubleshooting
Problem
Probable cause(s)
Suggested remedy
Machine not at operating
temperature
Wait 10 to 15 minutes
Machine will not produce fog
when remote control Fog
button pressed
Machine not powered up
Ensure mains power switch
on and AC power is OK
Smoke output is weak
Machine requires priming
Prime machine (page 13)
Wet, greasy, non-uniform
smoke output, fluid drips or
spits from nozzles, or very
loud noise when firing
machine
Incompatible smoke fluid
Use only approved fluid!
Mains fuse blown
Replace fuse (page 18)
Machine appears dead
No power at AC cable inlet
Check power cable and
circuit breaker
