12
MAC 600 (E) NT
DMX mode and address
The DMX mode options are described under “DMX-512 control” on page 20. Maximum flexibility is provided in
mode 4.
The address, also known as the start channel, is the first channel used to receive instructions from the controller. For
independent control, each fixture must be assigned its own control channels. Two MAC 600 (E) NTs may share the
same address, however, if identical behavior is desired. Address sharing can be useful for diagnostic purposes and
other situations, particularly when combined with the inverse pan and tilt options.
To s et DMX mode and addres s
1
Switch on the fixture.
2
If the fixture is in a flight case, press [MENU] and [ENTER] at the same time to disable pan and tilt reset. (A
partial reset can take 2 - 3 minutes and error messages will be displayed.)
3
Press [MENU] once to enter the main menu.
4
Select
P S E T
and press [ENTER]. Scroll to the desired DMX mode (1, 2, 3, or 4) and press [ENTER].
5
Select
d A d r
from the main menu and press [ENTER]. Scroll to the desired DMX address and press
[ENTER].
Summary of Contents for MAC 600 NT
Page 1: ...MAC 600 E NT user manual...