Martin Exterior Projection 500, User Manual

Page: 37 / 60

Exterior Projection 500 User Manual 37
6. See illustration below. Note the end of the gobo retaining spring with the bend (arrowed) that is
used for levering the spring out of the goboholder. Making sure that the bend in the spring is at
the top (as shown below), press the spring down into the goboholder until the spring clips into
its recess in the goboholder. Check that the spring is secure and that the gobo is still sitting flat
in the goboholder.
7. Hold the goboholder up to the rotating gobo wheel in its
original position. Rotate it until the alignment mark in the
goboholder lines up with the reference point as shown in
Step 3.
8. See illustrations below and right. Push the goboholder into
position, sliding the tongue that sticks out from the
goboholder into position (arrowed) behind the gobo
activation cog, pressing against the gobo wheel.