19
M4082E
ZA
2022-07 CSP1 S
Figure 5: Belt Cleaner Location & Chute Wall Cutouts
4.1 Locating belt cleaner
On both sides of chute, find pulley center point (A).
Measure radius of head pulley including lagging and belt thickness (B).
On the far side of chute, start from center point (A), measure the total distance
calculated in step 2 ( B + 13 mm [1/2 in.]), and draw an arc on chute wall.
On the operator side of chute, start from center point (A), draw an arc on
chute
wall with a radius of (B + 13 mm [1/2 in.]). Draw an additional arc on chute wall
with a radius of (B + 28.7 mm [1-1/8 in.]).