12
M4082E
ZA
2022-07 CSP1 S
3.2 Checking the operating conditions
Before installation, check whether the cleaner is suitable for the application.
For this purpose, it must be ensured that:
•
the available space allows unobstructed installation, maintenance, and
repair of the cleaner,
•
the cleaner meets the requirements for the respective operation (ambient
conditions, operating mode of the conveyor, properties of the bulk material,
fire protection, explosion protection, etc.)
•
a plugged conveyor chute may cause additional pressure against the
cleaner and may cause damage belt. Ensure conveyor chute remains
unplugged. Use a plugged chute sensor where appropriate.
•
special product variants are used if the cleaners are operated in ATEX
zones 22 and 21 and all explosion-related parameters and operating
modes are observed.
Ensure the conveyor belt is free of damages. Especially belt edge damages and
protruding parts of the conveyor belt can get caught in the cleaner and cause
further damage
3.3 Unpacking/transportation
WARNING
Heavy weight
The cleaners may have weights that require handling by lifting devices. Handling
heavy cleaners by hand can cause serious skeletal injuries.
−
Use suitable aids if the load is > 25 kg per person!
−
Identify the centre of gravity! Ensure that the cleaner cannot tilt during the
lifting process!
•
Inspect shipping container for damage. Report damage to delivery service
immediately and fill out delivery
service’s claim form. Keep any damaged
goods subject to examination.
•
Remove belt cleaner assembly from shipping container.
•
If anything is missing contact Martin Engineering or a representative.