Martin Professional Extube, User Manual

Page: 29 / 48

Fixture setup 29
Fixture settings
The Fixture settings window lets you select DMX modes (i.e. color
control options), group segments into pixels, and set DMX addresses.
DMX mode
The Fixture settings window lets you select a DMX mode (RGB, RGBW,
HSI or HSIC color control) for the fixtures or pixels in your installation. It is
possible to set different pixels to different DMX modes by scrolling
between pixels using the scroll arrows and changing the DMX mode
setting for each pixel.
Individual and grouped control of segments
The Fixture settings window lets you control 300 mm Extubes or
300 mm segments of 1200 mm Extubes individually, or put them into
groups that behave identically and are controlled as one pixel.
For example, if you select 1 in the Segments/Pixel box, each 300 mm
segment in the line of fixtures is controlled individually as one pixel that is
300 mm long.
If you select 3 in the Segments/Pixel box, the 300 mm segments are put
into groups of three segments. You then control each group of segments
as one pixel that is 900 mm long.