Martin Professional Extube, User Manual

Page: 37 / 48

Service and maintenance 37
5. See Figure 15. The diffuser filter is held in place by tabs (arrowed) in
the front cover. Unclip the filter from the tabs and remove it. If installing
a new diffuser filter, ensure that it is clipped under all the tabs.
6. Check that all seals in the front glass are correctly seated, engage the
side of the front glass opposite the retaining strip in the housing and
hinge the front glass down onto the housing.
7. Check that the front glass and retaining strip are correctly aligned and
clip the retaining strip firmly back into place on the housing. To ensure
a waterproof seal, make sure the strip is clipped into the housing
along its full length and holds the front glass securely.
Software installation
It may be necessary to upload new software (i.e. firmware) to the Extube if
you believe that the product has a software-related fault or if you want to
update to a newer version. Software updates are available from the Martin
website (http://www.martin.com) and can be installed via the DMX data
link with the following items:
• The Martin Uploader application, version 5.0 or later, downloadable free
of charge from the Support area of the Martin website.
• The Extube main CPU software update file, downloadable free of
charge from the Support area of the Martin website (this file can be
downloaded automatically from within the Martin Uploader application)
• A Martin Universal USB-DMX Interface or similar PC/fixture hardware
interface and a Windows PC (if you have a Martin MP-2 Uploader
device, it can also be used).
Figure 15: Diffuser filter retaining tabs