Basic service
13
B
ASIC
SERVICE
5
This chapter describes the maintenance procedures that you can perform
yourself:
•
Cleaning
•
Lamp maintenance
•
Replacing fuses
•
Gobo replacement/removal
C L E A N I N G
Regular cleaning of the elements in the optical path, as well as the fans and air
vents, is vital to maintaining the operational quality of the Ego.
Important! Excessive dust, smoke fluid, and particulate buildup degrades
performance and causes overheating and damage to the
fixture that is not covered by the warranty.
Cl ea ni ng the fa n a nd ai r vent s
To maintain adequate cooling, dust must be cleaned from the fan and air vents
periodically. Remove dust from the fan and air vents with a soft brush, cotton
swab, vacuum, or compressed air.
Clea ning opt i ca l c omponents
Clean the optical components regularly. The presence of smudges or dust on
optical surfaces can reduce the strength of the light output and the quality of the
effects.
Use care when cleaning optical components and work in a clean, well lit area.
The coated surfaces are fragile and easily scratched. Do not use solvents that can
damage plastic or painted surfaces.
1 Disconnect the fixture from power and allow the components to cool completely.
