12
Ego user manual
4 Pull the tab away from the fixture base to select the textured glass, push it towards
the fixture to select the etched gobo position.
5 Tighten the thumb screw.
6 Replace the fixture cover and tighten the access screws, taking care not to trap any
loose wires.
7 Adjust the focus (see “Focusing the Ego” on page 11).
O P E R A T I O N W I T H T H E O P T I O N A L
R E M O T E C O N T R O L
The (separately orderable) remote control can be used
to simulations control multiple Ego fixtures that are
c o n n e c t e d ( s e e “ L i n k i n g m u l t i p l e E g o s f o r
simultaneous control” on page 9).
A LAMP ON/OFF button is used to turn the fixtures
on and off.
A combined dimmer and intensity dial is used to set
the intensity of the light and the aggressiveness of the
effect, regardless of which trig mode is set. When the
dial is set at the beginning of the Dynamic scale, the
fixture will react relatively passively, and the level of
aggressiveness will increase the further clockwise
that the dial is wound.
